TASK™ Series
High Performance Casting Resins
Smooth-On's specialty line of performance urethane casting resins that offer superior physical properties compared to our popular Smooth-Cast™ line of general purpose casting resins. TASK™ plastics feature convenient mix ratios by volume (pbv) or weight (pbw), low viscosities, high tensile and flexural strength, as well as high flexural modulus. Some have specific performance characteristics such as flame resistance, high temperature resistance, and very high impact resistance.
HIGHLIGHTS
TASK™ 2 and TASK™ 3
TASK™ 2 and TASK™ 3
Low viscosity, fast cure resins made especially for rapid prototyping. These plastics are bright white and were formulated as higher performing alternatives to our Smooth‑Cast™ 300 Series resins.
No Scale Necessary
Low Viscosity
1:1 Mix by Volume
TASK™ 4
TASK™ 4
A unique casting resin that is very strong when cast in Ultra-Thin sections ranging from 0.03” to 0.50” (0.075cm to 1.27cm). TASK™ 4 exhibits very low shrinkage which is why this plastic has become a favorite of precision prototype and design professionals throughout the world.
Gram Scale Required
Low Viscosity
Low Shrinkage
TASK™ 5 and TASK™ 6
Lowest Cost Performance Plastics Anywhere
TASK™ 5 and TASK™ 6
Lowest Cost Performance Plastics Anywhere
Vacuum degassing is not necessary and they offer the convenience of a 1A:1B by volume. Differences between TASK™ 5 and TASK™ 6 are the pot life and demold time.
No Scale Necessary
One to One Mix Ratio
Low Viscosity
TASK™ 7 Flame Out™
Flame Rated
TASK™ 7 Flame Out™
Flame Rated
Low viscosity, fast set casting resin that meets UL 94 V‑O requirements for flame resistance. TASK™ 7 does not contain mercury, TDI or MOCA.
Flame Rating
One to One Mix Ratio
No Scale Necessary
TASK™ 8
Heat Resistant Casting Resin
TASK™ 8
Heat Resistant Casting Resin
Made specifically for prototyping / casting applications which require thermal resistance of up to 263°F/129°C. Heat curing this material is necessary to attain optimal heat resistance.
No Scale Necessary
Heat Resistant
1:1 Mix by Volume
TASK™ 9 ColorMatch
Color Match High Performance Resin
TASK™ 9 ColorMatch
Color Match High Performance Resin
Features very high compressive strength and tensile strength. TASK™ 9 is clear amber, which makes this plastic very easy to color using SO-Strong™, UVO™ or IGNITE™ colorants.
Easy to Color
1:1 Mix by Volume
No Scale Necessary
TASK™ 11
Semi-Rigid Resin - Dry Food Applications
TASK™ 11
Semi-Rigid Resin - Dry Food Applications
Semi-rigid plastic that is strong and very tough. Originally developed for high impact tooling, TASK™ 11 also offers good abrasion and chemical resistance and is ideal for a variety of industrial applications. This product is suitable for some FDA/USDA applications - dry food contact only.
Gram Scale Required
Impact Resistant
TASK™ 12
Impact Resistant Tooling Resin
TASK™ 12
Impact Resistant Tooling Resin
Semi-rigid urethane resin that offers extraordinary handling strength and impact resistance. Used for a variety of industrial applications including making prototype models, high impact parts and tools. CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY.
Gram Scale Required
Impact Resistant
TASK™ 13 and TASK™ 14
Semi-Rigid Black Casting Resin
TASK™ 13 and TASK™ 14
Semi-Rigid Black Casting Resin
With a Shore value of 50D, these semi-rigid plastics are used for a variety of industrial applications including fast mold making, fast model duplication, prototyping, durable miniatures, black props and special effects, or making parts that are impact resistant.
For Best Results… Do not cast TASK™ 13 or TASK™ 14 into platinum cure (addition cure) silicone molds.
Gram Scale Required
Impact Resistant
TASK™ 15
Roto Casting, Impact Resistant Performance Resin
TASK™ 15
Roto Casting, Impact Resistant Performance Resin
Features a gradual cure profile, making it ideal for rotational casting applications (making hollow parts). TASK™ 15 exhibits very high impact strength, even when cast in thin-wall sections.
Gram Scale Required
Impact Resistant
TASK™ 16
Tough 80A/30D Semi-Rigid Urethane
TASK™ 16
Tough 80A/30D Semi-Rigid Urethane
TASK™ 16 offers very high tear strength, impact resistance and wear resistance. Suitable for making fast mechanical parts, gaskets, wheels and pulleys, impact resistant props, and archival master models. It is also used to make fast, wear resistant rubber molds for casting concrete or concrete stamping pads.
Gram Scale Required
Impact Resistant
High Tear Strength
TASK™ 18
Aluminum filled mass casting resin
TASK™ 18
Aluminum filled mass casting resin
Relatively low viscosity aluminum filled urethane casting resin that was developed specifically for making short run vacuum forming molds with a very high compressive and flexural strength.
Gram Scale Required
Low Shrinkage
TASK™ 21
TASK™ 21
A performance urethane casting resin that has been described by many as having similar performance and mechanical characteristics to ABS plastic, with high compressive and flexural strength.
For Best Results… Do not cast TASK™ 21 into platinum cure (addition cure) silicone molds.
No Scale Necessary
Technical and Buying Information
| Select a Product Below | Description |
|---|---|
| › TASK™ 2 | Low Viscosity, High Performance Casting Resin |
| › TASK™ 3 | Low Viscosity, High Performance Casting Resin |
| › TASK™ 4 | Very Strong When Cast In Ultra-Thin Sections |
| › TASK™ 5 | Lowest Cost High Performance Casting Resin |
| › TASK™ 6 | Lowest Cost High Performance Casting Resin |
| › TASK™ 7 | Flame Rated Urethane Casting Resin |
| › TASK™ 8 | High Heat Resistant Urethane Casting Resin |
| › TASK™ 9 | Color Neutral High Performance Urethane Casting Resin |
| › TASK™ 11 | Semi-Rigid Urethane Casting Compound Suitable For Dry Food Contact |
| › TASK™ 12 | Semi-Rigid Resin With Extraordinary Strength and Impact Resistance |
| › TASK™ 13 | Semi-Rigid Black Urethane Casting Resin |
| › TASK™ 14 | Semi-Rigid Black Urethane Casting Resin |
| › TASK™ 15 | Impact Resistant Performance Resin Designed For Rotocasting |
| › TASK™ 16 | Extremely Tough 80A/30D Urethane Elastomer |
| › TASK™ 18 | Aluminum Filled Urethane Resin With Very High Compressive Strength |
| › TASK™ 21 | Urethane Casting Resin With Performance Similar To ABS |
VIDEOS and GALLERIES
Step-by-Step How-To Articles
video
How To Make Concrete Countertops for a Trade Show Display
In this video we show you how we created new concrete countertops for a custom pergola display.
How To Mold and Cast a Record That Actually Plays
How moldmaking and casting expand horizons for a seminar graduate whose passion is 78 RPM records
How To Make a 2 Piece Silicone Mold to Cast a Police Baton Prop
This step-by-step tutorial shows the process of making a two-piece block mold from a police baton using Mold Max® 30 silicone rubber. It also shows how to cast a reproduction using TASK 13 semi-rigid resin.
How To Replace a Brass Shower Door Handle
A "Cold Cast Brass" handle is molded and cast for a fraction of the cost of replacement.
How To Vent a Silicone Mold to Eliminate Bubbles In Casting
This sequence chronicles Mr. Ross's process in successfully reproducing this model using an advanced mold making technique.
video
How To Pre-Mix Urethane Casting Resin - TASK™ 3
Properly pre-mixing a urethane casting resin is important to ensure the material cures properly.
video
How To Make a Two Piece Silicone Mold of a Knife
We demonstrate using Mold Star 30 silicone, a platinum silicone for mold making...
video
How To Make a 2 Part Mold of an Antique Rifle
How to make a two piece silicone block mold of an antique Kentucky long rifle
How to Use TASK™ 16 Rubber for Impact Resistant Bumpers
Owen Morris, contacted Smooth-On for a material to make custom bumpers that would help minimize the damage to their rack guards.
video
How To Make a Silicone Mold of a Prototype Using Smooth-Sil™ 960
The process of creating a very high accuracy silicone mold using platinum cure silicone.
video
Making a DIY HEPA Respirator Using TASK™ 8 Urethane Resin
Learn how to quickly make multiple respirators for personal protection
video
Using a Vacuum Former to Create Lightweight Wall Panel Artwork
How to to make beautiful decorative wall panels using a TASK 18 vacuum forming tool.
What Have Other People Done With These Products?
Moen Uses Smooth-On To Spark Development
Moen uses the full spectrum of Smooth-On tin and platinum-based silicone rubbers to develop and refine proposed design
TASK® 15 Alligators Cast for a Good Cause
Beyond Design Studios delivered lightweight, rotationally cast alligator models
How To Make a Vacuum Forming Mold Using TASK™ 18 Urethane Resin
Parts that are thermoformed touch our lives every day including consumer packaging and advertising signs.
Theming Las Vegas: Smooth-On Products Used at Luxor Hotel & Casino
The Luxor is one of Las Vegas' best known hotels and casinos with its stunning Egyptian themed elements made with Smooth-On rubbers,
Making a Difference During the COVID-19 Pandemic With ATTA Inc.
ATTA Inc. in NYC donates over 1,200 visors made with Smooth-On materials