C
mpare
T
l
Add Material to Compare
All Technical Data
| EZ-Spray™ 35 | |
|---|---|
| Product Type |
|
| Mixed Viscosity | Sprayable |
| Mix Ratio By Volume | 1A:1B |
| Pot Life | 1.5 minutes |
| Cure Time | 1 hour |
| Shore A Hardness | 35 |
| Specific Gravity | 1.15 g/cc |
| Specific Volume | 24.1 cu. in./lb. |
| Color | Purple |
| Die B Tear Strength | 92 pli |
| Tensile Strength | 490 psi |
| Elongation @ Break | 415 % |
| Shrinkage | <.001 in. / in. |
Product Description
EZ-Spray™ 35
EZ~Spray™ 35 is a platinum cure silicone rubber developed specifically for spraying through the EZ~Spray™ Junior Cartridge System. With no or minimal surface preparation, EZ~Spray™ 35 can be sprayed onto vertical surfaces for making fast rubber molds of large surface areas. After a suitable thickness is attained, EZ~Spray™ 35 cures in 1 hour with negligible shrinkage to a durable mold rubber good for production casting resins, foams, concrete, plaster and other materials. Application of a support shell is achieved by spraying Smooth-On’s EZ~Spray™ Plastic over the rubber mold after it has fully cured. Read the EZ~Spray™ Junior manual prior to spraying.