C
mpare
T
l
Key Differences
| Mixed Viscosity | 900 cps | 300 cps |
| Pot Life | 5 minutes | 7 minutes |
| Cure Time | 16 hours | 1 hour |
| Color | Clear | Clear Amber |
| Shrinkage | 0.0001 in. / in. | 0.009 in. / in. |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| SMASH! Plastic™ | TASK™ 9 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 900 cps | 300 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | — | 115A:100B |
| Pot Life | 5 minutes | 7 minutes |
| Handling Time | 90 minutes | — |
| Cure Time | 16 hours | 1 hour |
| Shore D Hardness | 80 | 85 |
| Specific Gravity | 1.036 g/cc | 1.14 g/cc |
| Specific Volume | 26.7 cu. in./lb. | 24.3 cu. in./lb. |
| Color | Clear | Clear Amber |
| Tensile Strength | — | 7,800 psi |
| Tensile Modulus | — | 370,000 psi |
| Elongation @ Break | — | 6 % |
| Compressive Strength | — | 11,000 psi |
| Compressive Modulus | — | 98,000 psi |
| Flexural Strength | — | 11,850 psi |
| Flexural Modulus | — | 350,000 psi |
| Shrinkage | 0.0001 in. / in. | 0.009 in. / in. |
| Heat Deflection Temp | — | 131 °F |
Product Description
SMASH! Plastic™
SMASH! Plastic™ is a new urethane liquid plastic designed to shatter/crumble on impact ("breakaway glass"). SMASH! Plastic™ is water clear and, once fully cured, shatters like glass. It can be cast solid in thin sections to make window panes or rotationally cast to form hollow bottles, jars or other glass-like objects to be used as breakable props for movie and stage productions. Maximum recommended thickness is 1/8" (0.33 cm.).
CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.
TASK™ 9
TASK™ 9 Colormatch is a high performance urethane casting resin that features very high compressive strength and tensile strength. TASK™ 9 is clear amber, which makes this plastic very easy to color using SO-Strong™ or IGNITE™ colorants. With a mix ratio of 1A:1B by volume, TASK™ 9 is easy to use and a low mixed viscosity (300 cps) ensures minimal bubble entrapment. Pot life is 7 minutes and cure time is about 60 minutes (depending on mass).