C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 900 cps | 6,000 cps |
| Pot Life | 5 minutes | 15 minutes |
| Cure Time | 16 hours | 75 minutes |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 10 |
| Color | Clear | Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| SMASH! Plastic™ | Dragon Skin™ 10 NV | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 900 cps | 6,000 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | — | 1A:1B |
| Pot Life | 5 minutes | 15 minutes |
| Handling Time | 90 minutes | — |
| Cure Time | 16 hours | 75 minutes |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 10 |
| Specific Gravity | 1.036 g/cc | 1.07 g/cc |
| Specific Volume | 26.7 cu. in./lb. | 25.8 cu. in./lb. |
| Color | Clear | Translucent |
| Die B Tear Strength | — | 90 pli |
| Tensile Strength | — | 400 psi |
| Elongation @ Break | — | 663 % |
| 100% Modulus | — | 27 psi |
| Shrinkage | 0.0001 in. / in. | <.001 in. / in. |
Product Description
SMASH! Plastic™
SMASH! Plastic™ is a new urethane liquid plastic designed to shatter/crumble on impact ("breakaway glass"). SMASH! Plastic™ is water clear and, once fully cured, shatters like glass. It can be cast solid in thin sections to make window panes or rotationally cast to form hollow bottles, jars or other glass-like objects to be used as breakable props for movie and stage productions. Maximum recommended thickness is 1/8" (0.33 cm.).
CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.
Dragon Skin™ 10 NV
Dragon Skin™ NV Series silicones are easy to use translucent platinum silicones that are mixed 1A:1B by volume (no weighing scale necessary). They feature very low viscosities and vacuum degassing is not required for most applications.