C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 500 cps | 2,000 cps |
| Pot Life | 1.5 minutes | 45 minutes |
| Cure Time | 2 hours | 4 hours |
| Shore A Hardness | — | 00-45 |
| Specific Volume | 105 cu. in./lb. | 26.2 cu. in./lb. |
| Color | Beige | Water Clear Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FOAM-iT!™ 15 | Ecoflex™ 00-45 Near Clear™ | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 500 cps | 2,000 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:87B | — |
| Pot Life | 1.5 minutes | 45 minutes |
| Tack Free Time | 20 minutes | — |
| Cure Time | 2 hours | 4 hours |
| Shore A Hardness | — | 00-45 |
| Expansion (approximate) | 4 times | — |
| Foam Density | 15 lb/ft³ | — |
| Specific Gravity | 0.24 g/cc | 1.06 g/cc |
| Specific Volume | 105 cu. in./lb. | 26.2 cu. in./lb. |
| Color | Beige | Water Clear Translucent |
| Die B Tear Strength | — | 50 pli |
| Tensile Strength | — | 315 psi |
| Elongation @ Break | — | 980 % |
| 100% Modulus | — | 12 psi |
| Shrinkage | — | <.001 in. / in. |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
Product Description
FOAM-iT!™ 15
Smooth-On’s FOAM-iT!™ Series are two-component water blown rigid foams that are versatile and easy to use. FOAM-iT!™ products are available in 3lb., 4 lb., 5 lb., 8 lb., 10 lb.,15 lb. or 26 lb. per cubic foot densities. Parts A and B are measured and mixed in equal amounts by volume. The mixture is then poured into a mold or other form (apply release agent if necessary). The mixture will expand many times original volume (depending on which FOAM-iT!™ product you are using) and develop a uniform cell structure. FOAM-IT!™ 15 is tack-free in about 4 - 6.5 minutes, developing handling strength in 20 minutes and full cure in 2 hours.
All FOAM-iT!™ products can be used as a straight casting material, backfill material for hollow castings (adds structural strength) or as an encapsulation material, etc. They can be color pigmented with SO-Strong™, UVO™ or IGNITE™ colorants and are used for a variety of art/ craft, industrial design and special effects applications.
› Click here for more FOAM-iT!™ rigid foam products.
Ecoflex™ 00-45 Near Clear™
Ecoflex™ 00-45 Near Clear™ is a very soft, platinum silicone that is clearer than other Ecoflex™ silicones. Versatile and easy to use, Ecoflex™ 00-45 Near Clear™ rubber is mixed 1A:1B by weight or volume and cures at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured material is skin safe and certified by an independent laboratory.