C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 10,000 cps | 6,000 cps |
| Pot Life | 90 seconds | 40 minutes |
| Cure Time | 1 hour | 12 hours |
| Shore A Hardness | — | 12 |
| Specific Volume | 69 cu. in./lb. | 25.9 cu. in./lb. |
| Color | White | Water Clear Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Soma Foama™ 25 | SORTA-Clear™ 12 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 10,000 cps | 6,000 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 1A:1B | 1A:1B |
| Pot Life | 90 seconds | 40 minutes |
| Handling Time | 20 minutes | — |
| Cure Time | 1 hour | 12 hours |
| Shore A Hardness | — | 12 |
| Expansion (approximate) | 2-3 times | — |
| Foam Density | 25 lb/ft³ | — |
| Specific Gravity | 0.40 g/cc | 1.07 g/cc |
| Specific Volume | 69 cu. in./lb. | 25.9 cu. in./lb. |
| Color | White | Water Clear Translucent |
| Die B Tear Strength | — | 80 pli |
| Tensile Strength | — | 320 psi |
| Elongation @ Break | — | 590 % |
| 100% Modulus | — | 23 psi |
| Shrinkage | — | <.001 in. / in. |
Product Description
Soma Foama™ 25
Soma Foama™ is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. Soma Foama™ 25 is a higher density foam vs. original Soma Foama™ 15 which expands 2-3 times its original volume and develops a uniform 25 lb./cu. ft. cell structure (400 kg/m³). Vibrant colors can be achieved by adding Silc-Pig™ silicone color pigments. Cured foam is high heat resistance (will resist up to 350°F/176°C), water resistant, UV resistant and resists oxidation and ozone degradation.
SORTA-Clear™ 12
SORTA-Clear™ 12 is a premium water clear translucent silicone rubber (platinum catalyst) which cures at room temperature with negligible shrinkage. SORTA-Clear™ 12 cures in 12 hours with a final Shore hardness of 12A. SORTA-Clear™ 12 features exceptional tear and tensile strength.
SORTA-Clear™ silicone is ideal for making prototype, jewelry or other molds of any configuration where model visibility is important (i.e. extracting a model from the mold via cutting). Materials such as urethane, epoxy or polyester resins can then be cast into SORTA-Clear™ silicone without application of a release agent. Other materials such as wax and low melt metal alloys can also be cast into SORTA-Clear™. SORTA-Clear™ can be pigmented with Silc Pig™ pigments.