C
mpare
T
l
Key Differences
| Mixed Viscosity | Sprayable | 1,200 cps |
| Pot Life | 1.5 minutes | 240 minutes |
| Cure Time | 1 hour | 24 hours |
| Shore A Hardness | 35 | 15 |
| Color | Purple | Clear |
| Tensile Strength | 490 psi | 180 psi |
| Elongation @ Break | 415 % | 290 % |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| EZ-Spray™ 35 | Solaris™ | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | Sprayable | 1,200 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | — | 1A:1B |
| Pot Life | 1.5 minutes | 240 minutes |
| Cure Time | 1 hour | 24 hours |
| Shore A Hardness | 35 | 15 |
| Specific Gravity | 1.15 g/cc | 0.99 g/cc |
| Specific Volume | 24.1 cu. in./lb. | 28.1 cu. in./lb. |
| Color | Purple | Clear |
| Die B Tear Strength | 92 pli | — |
| Tensile Strength | 490 psi | 180 psi |
| Elongation @ Break | 415 % | 290 % |
| 100% Modulus | — | 25 psi |
| Shrinkage | <.001 in. / in. | <.001 in. / in. |
| Useful Temperature (min) | — | -149 °F |
| Useful Temperature (max) | — | 400 °F |
| Dielectric Constant, 100Hz | — | 2.78 |
| Dielectric Strength | — | 366 volts/mil |
| Dissipation Factor, 100Hz | — | 0.00 |
| Refractive Index | — | 1.41 nm |
| Thermal Conductivity | — | 0.18 W/M*K |
| Volume Resistivity | — | 3.16E+15 ohm/cm |
Product Description
EZ-Spray™ 35
EZ~Spray™ 35 is a platinum cure silicone rubber developed specifically for spraying through the EZ~Spray™ Junior Cartridge System. With no or minimal surface preparation, EZ~Spray™ 35 can be sprayed onto vertical surfaces for making fast rubber molds of large surface areas. After a suitable thickness is attained, EZ~Spray™ 35 cures in 1 hour with negligible shrinkage to a durable mold rubber good for production casting resins, foams, concrete, plaster and other materials. Application of a support shell is achieved by spraying Smooth-On’s EZ~Spray™ Plastic over the rubber mold after it has fully cured. Read the EZ~Spray™ Junior manual prior to spraying.
Solaris™
Solaris™ is a low viscosity, clear and colorless liquid platinum cure silicone rubber compound designed for use in protecting of electronic components and other assemblies. It will protect components against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards.