C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 650 cps | Paste |
| Barcol 935 Hardness | — | 71 |
| Shore D Hardness | 80 | — |
| Specific Volume | 25 cu. in./lb. | 19.5 cu. in./lb. |
| Color | Clear Yellow | Metallic |
| Tensile Modulus | 450,000 psi | 165,000 psi |
| Compressive Strength | 10,970 psi | 7,500 psi |
| Compressive Modulus | 122,000 psi | 160,000 psi |
| Heat Deflection Temp | 120 °F | 180 °F |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| EpoxAmite™ 102 | Metalset™ A4 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 650 cps | Paste |
| Mix Ratio By Volume | 3A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:29B | 1A:1B |
| Pot Life | 22 minutes | 22 minutes |
| Thin Film Working Time | 90 minutes | — |
| Cure Time | 15 hours | 16 hours |
| Barcol 935 Hardness | — | 71 |
| Shore D Hardness | 80 | — |
| Specific Gravity | 1.11 g/cc | 1.43 g/cc |
| Specific Volume | 25 cu. in./lb. | 19.5 cu. in./lb. |
| Color | Clear Yellow | Metallic |
| Tensile Strength | — | 3,600 psi |
| Tensile Modulus | 450,000 psi | 165,000 psi |
| Ultimate Tensile | 8,180 psi | — |
| Tensile Elongation | 3.15 % | — |
| Elongation @ Break | — | 1.2 % |
| Compressive Strength | 10,970 psi | 7,500 psi |
| Compressive Modulus | 122,000 psi | 160,000 psi |
| Flexural Strength | 12,220 psi | — |
| Flexural Modulus | 423,000 psi | — |
| Heat Deflection Temp | 120 °F | 180 °F |
| Flexural Strength on 6 ply / 10 oz. Laminate | 28,500 psi | — |
| Sag Resistance | — | 1/4 in. |
| Thermal Conductivity | — | 0.418 W/M*K |
| Ultimate Tensile on 6 ply / 10 oz. Laminate | 26,800 psi | — |
Product Description
EpoxAmite™ 102
EpoxAmite™ 102 is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. EpoxAmite™ 102 includes the EpoxAmite™ 100 Base and the EpoxAmite™ 102 MEDIUM Hardener. EpoxAmite™ 102 is unfilled, low in viscosity, odorless and cures at room temperature. Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted.
EpoxAmite™ 102 can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibers for lay-up applications or composite parts. EpoxAmite™ 102 can also be mixed with fillers such as fumed silica for gel coat applications. Urefil™ 3, Urefil™ 7 and other fillers can be added for fairing, filleting or bonding applications.
Applications: Wet Lay-Up Lamination, General Bonding & Repair, Clear Coating - Gel Coating, Barrier Coating, Thin-Section Casting, Water Proofing, Patching & Small Laminates
Also available: EpoxAmite™ 101 FAST SET and EpoxAmite™ 103 SLOW SET
Metalset™ A4
Metalset™ A4 is a powerful epoxy adhesive that has been used for years by all branches of the U.S. Military as well as every major airline and auto manufacturer in the world. Metalset™ A4 is used for hundreds of industrial bonding applications and offers excellent adhesion to porous or non-porous surfaces. It can be applied to vertical surfaces without sagging and cures overnight with negligible shrinking.
Once cured, Metalset™ A4 offers good machining qualities (sanding, drilling, tapping), and resists alkalies, dilute acids and solvents. Applications include stopping leaks in pipes, valves and tanks (i.e. car gas tanks), bonding like and unlike surfaces, filling metal joints, dents, etc., anchoring bolts in wood, concrete, and repairing metal surfaces.
Bell Spec - Metalset A4 meets all quality requirements and can be certified to Bell Spec 299-947-099 Rev. D (see below for details)