C
mpare
T
l
Key Differences
| Product Type |
|
|
| Pot Life | 20 minutes | 45 minutes |
| Tack Free Time | 4 hours | 2 hours |
| Barcol 935 Hardness | 87 | — |
| Shore D Hardness | 85 | — |
| Specific Gravity | 1.43 g/cc | 1.07 g/cc |
| Color | White | Translucent Clear |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| EpoxAcoat™ WHITE | Psycho Paint™ | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | Light Paste | |
| Mix Ratio By Volume | 5A:1B | 1A:1B + solvent |
| Mix Ratio By Weight | 100A:15B | 1A:1B + solvent |
| Pot Life | 20 minutes | 45 minutes |
| Thin Film Working Time | 40 minutes | — |
| Thin Film Recoat Time | 60 minutes | — |
| Tack Free Time | 4 hours | 2 hours |
| Cure Time | 16 hours | — |
| Barcol 935 Hardness | 87 | — |
| Shore D Hardness | 85 | — |
| Specific Gravity | 1.43 g/cc | 1.07 g/cc |
| Specific Volume | 19.4 cu. in./lb. | — |
| Color | White | Translucent Clear |
| Ultimate Tensile | 26,000 psi | — |
| Elongation @ Break | — | 1,000 % |
| Compressive Strength | 24,000 psi | — |
| Flexural Strength | 30,000 psi | — |
| Shrinkage | 0.00015 in. / in. | — |
| Heat Deflection Temp | 133 °F | — |
Product Description
EpoxAcoat™ WHITE
EpoxAcoat™ RED, GREY, WHITE and NEUTRAL are thixotropic epoxy gel coats which are widely used for hand laminating and tooling applications. They are tough and strong surface coat resins which cure at room temperature and offer exceptional abrasion resistance. EpoxAcoat™ NEUTRAL is formulated “color neutral” specifically for adding color pigments and fillers. For high temperature applications (to 284°F / 140°C) use EpoxAcoat HT™ (see separate technical bulletin).
Psycho Paint™
Psycho Paint™ is a versatile and easy to use platinum silicone paint base developed to help special effects and prosthetic artisans, doll makers, etc. easily create painted-on color effects for their platinum silicone creations. It is a two component translucent clear platinum-cure silicone that is used to make a base for color pigmenting. Once the desired color is attained, Psycho Paint™ is thinned with a solvent. Thin layers of paint can then be applied to a model’s surface (made of Dragon Skin™, Ecoflex™ or other platinum silicone) using an airbrush. It can also be applied by brushing.