C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | Light Paste | 23,000 cps |
| Pot Life | 20 minutes | 45 minutes |
| Cure Time | 16 hours | 7 hours |
| Barcol 935 Hardness | 87 | — |
| Shore D Hardness | 85 | — |
| Shore A Hardness | — | 10 |
| Specific Volume | 19.4 cu. in./lb. | 25.8 cu. in./lb. |
| Color | White | Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| EpoxAcoat™ WHITE | Dragon Skin™ 10 SLOW | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | Light Paste | 23,000 cps |
| Mix Ratio By Volume | 5A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:15B | 1A:1B |
| Pot Life | 20 minutes | 45 minutes |
| Thin Film Working Time | 40 minutes | — |
| Thin Film Recoat Time | 60 minutes | — |
| Tack Free Time | 4 hours | — |
| Cure Time | 16 hours | 7 hours |
| Barcol 935 Hardness | 87 | — |
| Shore D Hardness | 85 | — |
| Shore A Hardness | — | 10 |
| Specific Gravity | 1.43 g/cc | 1.07 g/cc |
| Specific Volume | 19.4 cu. in./lb. | 25.8 cu. in./lb. |
| Color | White | Translucent |
| Die B Tear Strength | — | 102 pli |
| Tensile Strength | — | 475 psi |
| Ultimate Tensile | 26,000 psi | — |
| Elongation @ Break | — | 1,000 % |
| 100% Modulus | — | 22 psi |
| Compressive Strength | 24,000 psi | — |
| Flexural Strength | 30,000 psi | — |
| Shrinkage | 0.00015 in. / in. | <.001 in. / in. |
| Heat Deflection Temp | 133 °F | — |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
| Dielectric Strength | — | >350 volts/mil |
Product Description
EpoxAcoat™ WHITE
EpoxAcoat™ RED, GREY, WHITE and NEUTRAL are thixotropic epoxy gel coats which are widely used for hand laminating and tooling applications. They are tough and strong surface coat resins which cure at room temperature and offer exceptional abrasion resistance. EpoxAcoat™ NEUTRAL is formulated “color neutral” specifically for adding color pigments and fillers. For high temperature applications (to 284°F / 140°C) use EpoxAcoat HT™ (see separate technical bulletin).
Dragon Skin™ 10 SLOW
Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)