C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | Light Paste | 3,000 cps |
| Pot Life | 20 minutes | 30 minutes |
| Cure Time | 16 hours | 4 hours |
| Barcol 935 Hardness | 87 | — |
| Shore D Hardness | 85 | — |
| Shore A Hardness | — | 00-20 |
| Specific Volume | 19.4 cu. in./lb. | 26.0 cu. in./lb. |
| Color | White | Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| EpoxAcoat™ WHITE | Ecoflex™ 00-20 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | Light Paste | 3,000 cps |
| Mix Ratio By Volume | 5A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:15B | 1A:1B |
| Pot Life | 20 minutes | 30 minutes |
| Thin Film Working Time | 40 minutes | — |
| Thin Film Recoat Time | 60 minutes | — |
| Tack Free Time | 4 hours | — |
| Cure Time | 16 hours | 4 hours |
| Barcol 935 Hardness | 87 | — |
| Shore D Hardness | 85 | — |
| Shore A Hardness | — | 00-20 |
| Specific Gravity | 1.43 g/cc | 1.07 g/cc |
| Specific Volume | 19.4 cu. in./lb. | 26.0 cu. in./lb. |
| Color | White | Translucent |
| Die B Tear Strength | — | 30 pli |
| Tensile Strength | — | 160 psi |
| Ultimate Tensile | 26,000 psi | — |
| Elongation @ Break | — | 845 % |
| 100% Modulus | — | 8 psi |
| Compressive Strength | 24,000 psi | — |
| Flexural Strength | 30,000 psi | — |
| Shrinkage | 0.00015 in. / in. | <.001 in. / in. |
| Heat Deflection Temp | 133 °F | — |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
Product Description
EpoxAcoat™ WHITE
EpoxAcoat™ RED, GREY, WHITE and NEUTRAL are thixotropic epoxy gel coats which are widely used for hand laminating and tooling applications. They are tough and strong surface coat resins which cure at room temperature and offer exceptional abrasion resistance. EpoxAcoat™ NEUTRAL is formulated “color neutral” specifically for adding color pigments and fillers. For high temperature applications (to 284°F / 140°C) use EpoxAcoat HT™ (see separate technical bulletin).
Ecoflex™ 00-20
Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.
Certified Skin Safe - Cured Ecoflex™ 00-20 is skin safe and certified by an independent laboratory.