C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 21,000 cps | Dough |
| Shore D Hardness | — | 50 |
| Shore A Hardness | 15 | — |
| Specific Volume | 25.8 cu. in./lb. | 61.6 cu. in./lb. |
| Color | Translucent | Grey |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Dragon Skin™ 15 | Free Form™ AIR | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 21,000 cps | Dough |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 1A:1B | 1A:1B |
| Pot Life | 40 minutes | — |
| Cure Time | 7 hours | — |
| Shore D Hardness | — | 50 |
| Shore A Hardness | 15 | — |
| Specific Gravity | 1.07 g/cc | 0.45 g/cc |
| Specific Volume | 25.8 cu. in./lb. | 61.6 cu. in./lb. |
| Color | Translucent | Grey |
| Die B Tear Strength | 112 pli | — |
| Tensile Strength | 537 psi | — |
| Elongation @ Break | 771 % | — |
| 100% Modulus | 40 psi | — |
| Shrinkage | <.001 in. / in. | — |
| Heat Deflection Temp | — | 140 °F |
| Useful Temperature (min) | -65 °F | — |
| Useful Temperature (max) | 450 °F | — |
| Buoyant Force | — | 10.4 lb/ft³ |
| Dielectric Strength | >350 volts/mil | — |
Product Description
Dragon Skin™ 15
Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C).
Free Form™ AIR
Free Form™AIR is an extremely lightweight epoxy putty suitable for an infinite variety of industrial and art-related applications. This is a low-odor, low shrinkage putty that is unique, inexpensive and easy to use. Free Form™AIR is mixed by hand with a 1A:1B by volume or weight mix ratio. It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong. Cured Free Form™AIR is so lightweight, it will float in water. It can be sanded, shaped, and drilled. It will readily accept any paint. Free Form can also be color pigmented with UVO™ or Ignite™ colorants.