C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 21,000 cps | Light Paste |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Cure Time | 7 hours | 24 hours |
| Shore D Hardness | — | 85 |
| Shore A Hardness | 15 | — |
| Color | Translucent | Dark Red |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Dragon Skin™ 15 | EpoxAcoat™ HT | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 21,000 cps | Light Paste |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 1A:1B | 100A:18B |
| Pot Life | 40 minutes | 40 minutes |
| Thin Film Working Time | — | 75 minutes |
| Thin Film Recoat Time | — | 4 hours |
| Cure Time | 7 hours | 24 hours |
| Shore D Hardness | — | 85 |
| Shore A Hardness | 15 | — |
| Specific Gravity | 1.07 g/cc | — |
| Specific Volume | 25.8 cu. in./lb. | — |
| Color | Translucent | Dark Red |
| Die B Tear Strength | 112 pli | — |
| Tensile Strength | 537 psi | — |
| Elongation @ Break | 771 % | — |
| 100% Modulus | 40 psi | — |
| Shrinkage | <.001 in. / in. | — |
| Heat Deflection Temp | — | 133 °F |
| Useful Temperature (min) | -65 °F | — |
| Useful Temperature (max) | 450 °F | — |
| Dielectric Strength | >350 volts/mil | — |
| Heat Deflection With Post Cure | — | 284 °F |
Product Description
Dragon Skin™ 15
Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C).
EpoxAcoat™ HT
EpoxAcoat™ HT is a slightly thixotropic epoxy gel coat that offers high heat resistance (post cure required). Cured epoxy is tough and offers exceptional abrasion resistance. This surface coat will wet out well over a variety of surfaces with good sag resistance. Applications include laminating, precision tooling, master and pattern making, core boxes and fixtures.
Use as a surface coat for EpoxAmite™ HT high temperature laminating epoxy.