C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 3,000 cps | 250 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Cure Time | 4 hours | 16 hours |
| Shore A Hardness | 00-20 | 95 |
| Color | Translucent | Clear |
| Tensile Strength | 160 psi | 2,500 psi |
| Elongation @ Break | 845 % | 175 % |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Ecoflex™ 00-20 | Clear Flex™ 95 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 3,000 cps | 250 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 1A:1B | 1A:1.5B |
| Pot Life | 30 minutes | 25 minutes |
| Cure Time | 4 hours | 16 hours |
| Shore A Hardness | 00-20 | 95 |
| Specific Gravity | 1.07 g/cc | 1.04 g/cc |
| Specific Volume | 26.0 cu. in./lb. | 26.8 cu. in./lb. |
| Color | Translucent | Clear |
| Die B Tear Strength | 30 pli | — |
| Die C Tear Strength | — | 200 pli |
| Tensile Strength | 160 psi | 2,500 psi |
| Elongation @ Break | 845 % | 175 % |
| 100% Modulus | 8 psi | — |
| Shrinkage | <.001 in. / in. | 0.0028 in. / in. |
| Useful Temperature (min) | -65 °F | — |
| Useful Temperature (max) | 450 °F | — |
| Dielectric Constant, 100Hz | — | 6.62 |
| Dielectric Strength | — | 474 volts/mil |
| Dissipation Factor, 100Hz | — | 0.103 |
| Volume Resistance | — | >7.646E+13 ohm |
| Volume Resistivity | — | >6.014E+15 ohm/cm |
Product Description
Ecoflex™ 00-20
Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.
Certified Skin Safe - Cured Ecoflex™ 00-20 is skin safe and certified by an independent laboratory.
Clear Flex™ 95
Clear Flex™ 95 is a water white clear urethane liquid rubber compounds designed for applications that require absolute clarity and resistance to sunlight. Low viscosity ensures easy mixing and pouring. Clear Flex™ 95 cures at room temperature with negligible shrinkage.
CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.