C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 13,000 cps | Light Paste |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 1 minute | 40 minutes |
| Cure Time | 5 minutes | 24 hours |
| Shore D Hardness | — | 85 |
| Shore A Hardness | 5 | — |
| Color | Translucent | Dark Red |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Ecoflex™ 5 | EpoxAcoat™ HT | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 13,000 cps | Light Paste |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 1A:1B | 100A:18B |
| Pot Life | 1 minute | 40 minutes |
| Thin Film Working Time | — | 75 minutes |
| Thin Film Recoat Time | — | 4 hours |
| Cure Time | 5 minutes | 24 hours |
| Shore D Hardness | — | 85 |
| Shore A Hardness | 5 | — |
| Specific Gravity | 1.07 g/cc | — |
| Specific Volume | 25.8 cu. in./lb. | — |
| Color | Translucent | Dark Red |
| Die B Tear Strength | 75 pli | — |
| Tensile Strength | 350 psi | — |
| Elongation @ Break | 1,000 % | — |
| 100% Modulus | 15 psi | — |
| Shrinkage | <.001 in. / in. | — |
| Heat Deflection Temp | — | 133 °F |
| Useful Temperature (min) | -65 °F | — |
| Useful Temperature (max) | 450 °F | — |
| Heat Deflection With Post Cure | — | 284 °F |
Product Description
Ecoflex™ 5
Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.
EpoxAcoat™ HT
EpoxAcoat™ HT is a slightly thixotropic epoxy gel coat that offers high heat resistance (post cure required). Cured epoxy is tough and offers exceptional abrasion resistance. This surface coat will wet out well over a variety of surfaces with good sag resistance. Applications include laminating, precision tooling, master and pattern making, core boxes and fixtures.
Use as a surface coat for EpoxAmite™ HT high temperature laminating epoxy.