C
mpare
T
l
Add Material to Compare
Key Differences
| Product Type |
|
|
| Mixed Viscosity | Brushable | 370 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 5 minutes | 12 hours |
| Shore D Hardness | — | 80 |
| Shore A Hardness | 25 | — |
| Color | Purple | Clear |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Body Double™ Standard Set | EpoxAcast™ 692 Deep Pour | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | Brushable | 370 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 1A:1B | 100A:40B |
| Pot Life | 5 minutes | 12 hours |
| Cure Time | 20 minutes | — |
| Shore D Hardness | — | 80 |
| Shore A Hardness | 25 | — |
| Specific Gravity | 1.17 g/cc | 1.08 g/cc |
| Specific Volume | 23.7 cu. in./lb. | 25.7 cu. in./lb. |
| Color | Purple | Clear |
| Die C Tear Strength | 40 pli | — |
| Tensile Strength | 525 psi | — |
| Tensile Modulus | — | 378,000 psi |
| Ultimate Tensile | — | 4,585 psi |
| Tensile Elongation | — | 3.1 % |
| Elongation @ Break | 500 % | — |
| Compressive Strength | — | 5,777 psi |
| Compressive Modulus | — | 82,000 psi |
| Flexural Strength | — | 6,780 psi |
| Flexural Modulus | — | 203,000 psi |
| Shrinkage | <.001 in. / in. | 0.007 in. / in. |
| Heat Deflection Temp | — | 100 °F |
| Refractive Index | — | 1.5372 nm |
Product Description
Body Double™ Standard Set
Body Double™ is a long lasting platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model – far better detail than any alginate! Body Double™ is skin safe and certified by an independent laboratory.
EpoxAcast™ 692 Deep Pour
EpoxAcast™ 692 Deep Pour is an UV resistant clear casting epoxy resins suitable for a variety of industrial and art related projects requiring a rigid, clear finished casting. EpoxAcast™ 692 features a very low viscosity for easy mixing and minimal bubble entrapment. Castings cure with negligible shrinkage and are very hard and strong. Resin can be colored with UVO™ or IGNITE™ colorants. Cast Magic™ and Glow Worm™ powders can also be added to create amazing casting effects.