C
mpare
T
l
Add Material to Compare
Key Differences
| Product Type |
|
|
| Mixed Viscosity | Brushable | 600 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 5 minutes | 2 hours |
| Cure Time | 20 minutes | 48 hours |
| Shore D Hardness | — | 80 |
| Shore A Hardness | 25 | — |
| Color | Purple | Clear |
| Tensile Strength | 525 psi | 3,500 psi |
| Elongation @ Break | 500 % | 10 % |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Body Double™ Standard Set | Crystal Clear™ 204 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | Brushable | 600 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 1A:1B | 100A:90B |
| Pot Life | 5 minutes | 2 hours |
| Cure Time | 20 minutes | 48 hours |
| Shore D Hardness | — | 80 |
| Shore A Hardness | 25 | — |
| Specific Gravity | 1.17 g/cc | 1.036 g/cc |
| Specific Volume | 23.7 cu. in./lb. | 26.7 cu. in./lb. |
| Color | Purple | Clear |
| Die C Tear Strength | 40 pli | — |
| Tensile Strength | 525 psi | 3,500 psi |
| Tensile Modulus | — | 86,240 psi |
| Elongation @ Break | 500 % | 10 % |
| Compressive Strength | — | 4,200 psi |
| Compressive Modulus | — | 44,000 psi |
| Flexural Strength | — | 5,390 psi |
| Flexural Modulus | — | 183,200 psi |
| Shrinkage | <.001 in. / in. | 0.002 in. / in. |
| Heat Deflection Temp | — | 120 °F |
Product Description
Body Double™ Standard Set
Body Double™ is a long lasting platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model – far better detail than any alginate! Body Double™ is skin safe and certified by an independent laboratory.
Crystal Clear™ 204
Crystal Clear™ 204 is a water white clear and made specifically for applications that require clarity. These rigid urethane casting resins differ only in working and demold times. Low viscosity ensures easy mixing and pouring. Crystal Clear™ resins cure at room temperature* with negligible shrinkage.
CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.