C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 430 cps | 30,000 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 5 minutes | 45 minutes |
| Cure Time | 30 minutes | 16 hours |
| Shore D Hardness | 60 | — |
| Shore A Hardness | — | 60 |
| Color | Translucent White | Green |
| Tensile Strength | 2,420 psi | 650 psi |
| Elongation @ Break | 100 % | 270 % |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Smooth-Cast™ 60D | Smooth‑Sil™ 960 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 430 cps | 30,000 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 100A:93B | 100A:10B |
| Pot Life | 5 minutes | 45 minutes |
| Cure Time | 30 minutes | 16 hours |
| Shore D Hardness | 60 | — |
| Shore A Hardness | — | 60 |
| Specific Gravity | 1.05 g/cc | 1.25 g/cc |
| Specific Volume | 26.4 cu. in./lb. | 22.2 cu. in./lb. |
| Color | Translucent White | Green |
| Die B Tear Strength | — | 110 pli |
| Tensile Strength | 2,420 psi | 650 psi |
| Elongation @ Break | 100 % | 270 % |
| 100% Modulus | — | 280 psi |
| Shrinkage | 0.012 in. / in. | <.001 in. / in. |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
Product Description
Smooth-Cast™ 60D
The Smooth-Cast™ Semi-Rigid line of low-cost semi-rigid urethane casting resins cure quickly to semi-rigid plastics that offer exceptional strength and impact resistance.
New Formulations – New Look!
Smooth-Cast™ 60D is newly reformulated with a translucent white appearance and improved physical properties. All Smooth-Cast semi rigids are now mercury free and phthalate free. These plastics are easy-to-use (mix ratio is 1A:1B by volume) and have low viscosities for minimal bubble entrapment. Vibrant colors are possible by adding SO-Strong™, UVO™ or Ignite™ color pigments.
These semi-rigid plastics are good for making impact resistant prototypes, models, toys, props, climbing holds, etc.
› Click here for more Smooth-Cast™ resin products.
Smooth‑Sil™ 960
Smooth-Sil™ 960 is a Shore 60A platinum cure silicone rubber developed for a variety of industrial applications. Compared to other 60A platinum silicones, Smooth-Sil™ 960 has a relatively low viscosity and is easy to mix, de-air and pour. Silicone cures in 16 hours with negligible shrinkage to a firm rubber with high tensile and tear strength.
Smooth-Sil™ 960 offers good chemical and heat resistance, making this a good choice for production casting of resins and expanding foams. Because of its firmness, Smooth-Sil™ 960 molds are also used for spin casting. It is also used for embedding and electrical applications. Smooth-Sil™ 960 is suitable for food related applications.
Note: This product will not cure against surfaces containing sulfur, even when sealed.