C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 430 cps | 3,000 cps |
| Pot Life | 5 minutes | 40 minutes |
| Cure Time | 30 minutes | 4 hours |
| Shore D Hardness | 60 | — |
| Shore A Hardness | — | 00-31 |
| Color | Translucent White | Water Clear Translucent |
| Tensile Strength | 2,420 psi | 200 psi |
| Elongation @ Break | 100 % | 900 % |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Smooth-Cast™ 60D | Ecoflex™ 00-31 Near Clear™ | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 430 cps | 3,000 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:93B | — |
| Pot Life | 5 minutes | 40 minutes |
| Cure Time | 30 minutes | 4 hours |
| Shore D Hardness | 60 | — |
| Shore A Hardness | — | 00-31 |
| Specific Gravity | 1.05 g/cc | 1.07 g/cc |
| Specific Volume | 26.4 cu. in./lb. | 26 cu. in./lb. |
| Color | Translucent White | Water Clear Translucent |
| Die B Tear Strength | — | 38 pli |
| Tensile Strength | 2,420 psi | 200 psi |
| Elongation @ Break | 100 % | 900 % |
| 100% Modulus | — | 10 psi |
| Shrinkage | 0.012 in. / in. | <.001 in. / in. |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
Product Description
Smooth-Cast™ 60D
The Smooth-Cast™ Semi-Rigid line of low-cost semi-rigid urethane casting resins cure quickly to semi-rigid plastics that offer exceptional strength and impact resistance.
New Formulations – New Look!
Smooth-Cast™ 60D is newly reformulated with a translucent white appearance and improved physical properties. All Smooth-Cast semi rigids are now mercury free and phthalate free. These plastics are easy-to-use (mix ratio is 1A:1B by volume) and have low viscosities for minimal bubble entrapment. Vibrant colors are possible by adding SO-Strong™, UVO™ or Ignite™ color pigments.
These semi-rigid plastics are good for making impact resistant prototypes, models, toys, props, climbing holds, etc.
› Click here for more Smooth-Cast™ resin products.
Ecoflex™ 00-31 Near Clear™
Ecoflex™ 00-31 Near Clear™ is a very soft, platinum silicone that is clearer than other Ecoflex™ silicones. Versatile and easy to use, Ecoflex™ 00-31 Near Clear™ rubber is mixed 1A:1B by weight or volume and cures at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured material is skin safe and certified by an independent laboratory.