C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 430 cps | 1,100 cps |
| Cure Time | 30 minutes | 48 hours |
| Shore D Hardness | 60 | — |
| Shore A Hardness | — | 60 |
| Color | Translucent White | White |
| Tensile Strength | 2,420 psi | 990 psi |
| Elongation @ Break | 100 % | 400 % |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Smooth-Cast™ 60D | Simpact™ 60A | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 430 cps | 1,100 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:93B | 100A:94B |
| Pot Life | 5 minutes | 4 minutes |
| Handling Time | — | 2 hours |
| Cure Time | 30 minutes | 48 hours |
| Shore D Hardness | 60 | — |
| Shore A Hardness | — | 60 |
| Specific Gravity | 1.05 g/cc | 1.08 g/cc |
| Specific Volume | 26.4 cu. in./lb. | 25.7 cu. in./lb. |
| Color | Translucent White | White |
| Die C Tear Strength | — | 142 pli |
| Tensile Strength | 2,420 psi | 990 psi |
| Elongation @ Break | 100 % | 400 % |
| 100% Modulus | — | 312 psi |
| Shrinkage | 0.012 in. / in. | <.007 in. / in. |
Product Description
Smooth-Cast™ 60D
The Smooth-Cast™ Semi-Rigid line of low-cost semi-rigid urethane casting resins cure quickly to semi-rigid plastics that offer exceptional strength and impact resistance.
New Formulations – New Look!
Smooth-Cast™ 60D is newly reformulated with a translucent white appearance and improved physical properties. All Smooth-Cast semi rigids are now mercury free and phthalate free. These plastics are easy-to-use (mix ratio is 1A:1B by volume) and have low viscosities for minimal bubble entrapment. Vibrant colors are possible by adding SO-Strong™, UVO™ or Ignite™ color pigments.
These semi-rigid plastics are good for making impact resistant prototypes, models, toys, props, climbing holds, etc.
› Click here for more Smooth-Cast™ resin products.
Simpact™ 60A
Simpact™ 60A urethane is a low odor, fast-setting urethane elastomer which offers very high tear strength, impact resistance and wear resistance. Simpact™ urethanes are phthalate free, mercury free and MOCA free. Simpact™ urethanes pour easily. Working time is 4 minutes, handling time is 2 hours and full cure time is 48 hours at room temperature.
Cured rubber has exceptional performance characteristics and dimensional stability. Simpact™ urethanes can be colored with SO-Strong™, UVO™ or Ignite™ colorants. Simpact™ urethanes are suitable for making impact resistant props, prototypes and display pieces.
This material may congeal if exposed to cold temperatures. To reconstitute, Part A & B must be heated to 90°F (33°C) then thoroughly mixed to an even consistency.