Using APHIX™ Silicone Adhesion Promoter for Medical Simulation Applications

Overview

APHIX™ Silicone Adhesion Promoter will temporarily adhere most surgical tapes, bandages, dressings, etc. to silicone rubber surfaces including training mannequins, devices, etc. This non-VOC formula is a low viscosity liquid that brushes on easily and dries quickly. One application lasts for repeated use. APHIX™ Silicone Adhesion Promoter can be removed with NOVOCS™ GLOSS silicone solvent.

APPLICATION & REMOVAL... Application - APHIX™ Silicone Adhesion Promoter can be applied using a cotton swab, non-latex sponge or small fine bristle brush. Apply adhesive to the silicone surface. Allow APHIX™ Silicone Adhesion Promoter to dry for 10 minutes. APHIX™ Silicone Adhesion Promoter will not work unless it has thoroughly dried.

Be sure to the securely replace cap after each use as contents will evaporate. Once APHIX™ Silicone Adhesion Promoter has dried, apply the adhesive surgical tape, bandage or dressing.

One application of APHIX™ Silicone Adhesion Promoter lasts for repeated use.

Removal of APHIX™ - APHIX™ Silicone Adhesion Promoter can be removed using NOVOCS™ GLOSS silicone solvent.