How To Mold and Cast a Resin Sculpture ‑ Ghost Rider

Step 4: Preparing Mold For Free Form™ AIR

When the rubber is fully cured, a razor knife is used to trim the rubber. Sharp clean edges will help the rubber mold register with the support shell.

Apply a liberal coat of Sonite™ Wax to the entire surface of the baseboard. Let the Sonite Wax™ dry for 10 minutes and apply a second coat.

‹ Previous: Applying Rebound™ 25 Next: Dispensing and Applying FreeForm™ AIR to Create Support Shell / Demold ›