Page 36 - Smooth-OnCatalog
P. 36
Laminating &
Surface Coat EpoxAmite® Series
Epoxies Laminating System
EpoxAmite® 100 Epoxy Laminating System is
an easy-to-use liquid epoxy system formulated for a
wide variety of fabrication applications. EpoxAmite®
100 Laminating System is unfilled,
low in viscosity, odorless and Pump
cures at room temperature.
Cured epoxy displays See Pg. 46
exceptional physical and Mix
performance properties. Apply
It can be sanded, shaped, EpoxAmite® 100 Laminating System can be
machined, drilled, tapped used with reinforcements such as S-Glass, E-Glass,
and painted. Kevlar and carbon fibers for lay-up applications or
composite parts. EpoxAmite® 100 can also be mixed
with fillers such as fumed silica for gel coat applications.
URE-FIL® 3, URE-FIL® 7 and other fillers can be added for fairing,
filleting or bonding applications.
Also available:
Three EpoxAmite® WHITE Laminating System
EpoxAmite® White can not be used with
Speeds! 101 Fast “One Push” pre-calibrated pumps.
102 Medium
103 Slow
Epic® Epoxy Thinner EpoxAcoat® RED or GREY
Epic® Epoxy Thinner is a clear, Is a thixotropic
water-like liquid that will lower epoxy gel coat that
the viscosity of Smooth-On is widely used for
casting and laminating epoxies. hand laminating/tooling
Epic® will also aid in reducing applications. It is a tough & strong
bubble entrapment. surface coat resin that cures at room
Lowers the Epic IS NOT A SOLVENT, is not temperature and offers exceptional abrasion
®
Viscosity hazardous and contains no VOC’s resistance EpoxAcoat® is easy to use, wets
of Epoxies or phthalates. Solvents that are out well over a variety of surfaces and will
for: commonly used to thin epoxies coat vertical surfaces without sagging. It is
®
Laminating cause shrinkage. Epic® is 100% Ultra-tough EpoxAcoat designed to complement and work well
with our EpoxAmite® Laminating System
RED tool is ready to make
Casting reactive fluid, does not evaporate composite parts for (used as a backup for making tools,
and does not cause shrinkage.
Infusion motorcycles. patterns, fixtures, etc.).
A:B Mix Ratio Mixed Viscosity Pot Life Demold Time Hardness (Shore D) Shrinkage (in./in.) Specific Volume (cu. in./lb.) Ultimate Tensile Compressive Strength Color
Product Name
EpoxAmite®101 Fast 100A:24B pbw 1,000 cps 11 min. 6-8 hrs. 84D N/A 24.5 7,930 psi 11,550 psi Clear Yellow
EpoxAmite®102 Medium 100A:29B pbw 650 cps 22 min. 10-15 hrs. 80D N/A 25 8,180 psi 10,970 psi Clear Yellow
EpoxAmite®103 Slow 100A:28.4B pbw 650 cps 55 min. 24 hrs. 80D N/A 25.2 7,910 psi 10,500 psi Clear Yellow
EpoxAmite® White 101 Fast 100A:20B pbw 3,400 cps 20 min. 10-15 hrs. 83D N/A 22.2 5,130 psi 16,290 psi White
EpoxAmite® White 102 Medium 100A:23B pbw 2,800 cps 62 min. 20-24hrs. 85D N/A 22.5 5,600 psi 11,960 psi White
EpoxAcoat® RED 100A:15B pbw Paste 20 min. 16 hrs. 85D .00015 18.5 26,000 psi 24,000 psi Red
EpoxAcoat® GREY 100A:15B pbw Paste 20 min. 16 hrs. 85D .00015 18.5 26,000 psi 24,000 psi Grey
35 Learn more at: www.smooth-on.com
Surface Coat EpoxAmite® Series
Epoxies Laminating System
EpoxAmite® 100 Epoxy Laminating System is
an easy-to-use liquid epoxy system formulated for a
wide variety of fabrication applications. EpoxAmite®
100 Laminating System is unfilled,
low in viscosity, odorless and Pump
cures at room temperature.
Cured epoxy displays See Pg. 46
exceptional physical and Mix
performance properties. Apply
It can be sanded, shaped, EpoxAmite® 100 Laminating System can be
machined, drilled, tapped used with reinforcements such as S-Glass, E-Glass,
and painted. Kevlar and carbon fibers for lay-up applications or
composite parts. EpoxAmite® 100 can also be mixed
with fillers such as fumed silica for gel coat applications.
URE-FIL® 3, URE-FIL® 7 and other fillers can be added for fairing,
filleting or bonding applications.
Also available:
Three EpoxAmite® WHITE Laminating System
EpoxAmite® White can not be used with
Speeds! 101 Fast “One Push” pre-calibrated pumps.
102 Medium
103 Slow
Epic® Epoxy Thinner EpoxAcoat® RED or GREY
Epic® Epoxy Thinner is a clear, Is a thixotropic
water-like liquid that will lower epoxy gel coat that
the viscosity of Smooth-On is widely used for
casting and laminating epoxies. hand laminating/tooling
Epic® will also aid in reducing applications. It is a tough & strong
bubble entrapment. surface coat resin that cures at room
Lowers the Epic IS NOT A SOLVENT, is not temperature and offers exceptional abrasion
®
Viscosity hazardous and contains no VOC’s resistance EpoxAcoat® is easy to use, wets
of Epoxies or phthalates. Solvents that are out well over a variety of surfaces and will
for: commonly used to thin epoxies coat vertical surfaces without sagging. It is
®
Laminating cause shrinkage. Epic® is 100% Ultra-tough EpoxAcoat designed to complement and work well
with our EpoxAmite® Laminating System
RED tool is ready to make
Casting reactive fluid, does not evaporate composite parts for (used as a backup for making tools,
and does not cause shrinkage.
Infusion motorcycles. patterns, fixtures, etc.).
A:B Mix Ratio Mixed Viscosity Pot Life Demold Time Hardness (Shore D) Shrinkage (in./in.) Specific Volume (cu. in./lb.) Ultimate Tensile Compressive Strength Color
Product Name
EpoxAmite®101 Fast 100A:24B pbw 1,000 cps 11 min. 6-8 hrs. 84D N/A 24.5 7,930 psi 11,550 psi Clear Yellow
EpoxAmite®102 Medium 100A:29B pbw 650 cps 22 min. 10-15 hrs. 80D N/A 25 8,180 psi 10,970 psi Clear Yellow
EpoxAmite®103 Slow 100A:28.4B pbw 650 cps 55 min. 24 hrs. 80D N/A 25.2 7,910 psi 10,500 psi Clear Yellow
EpoxAmite® White 101 Fast 100A:20B pbw 3,400 cps 20 min. 10-15 hrs. 83D N/A 22.2 5,130 psi 16,290 psi White
EpoxAmite® White 102 Medium 100A:23B pbw 2,800 cps 62 min. 20-24hrs. 85D N/A 22.5 5,600 psi 11,960 psi White
EpoxAcoat® RED 100A:15B pbw Paste 20 min. 16 hrs. 85D .00015 18.5 26,000 psi 24,000 psi Red
EpoxAcoat® GREY 100A:15B pbw Paste 20 min. 16 hrs. 85D .00015 18.5 26,000 psi 24,000 psi Grey
35 Learn more at: www.smooth-on.com
