Page 37 - Smooth-OnCatalog
P. 37
Laminating &
Metal and color Surface Coat
effects are also easily
achieved by adding High Performance 3D Print Coating
Cast Magic® powders, is a protective coating for smoothing and finishing Epoxies
and So-Strong® or 3D printed parts. Coating self-levels and wets out
UVO® pigments. uniformly without leaving brush strokes.
XTC-3D® cures to a hard, impact resistant
coating that can be sanded, primed
and painted. It works with PLA, ABS,
Laywood, Powder
Printed Parts and
other rigid media.
XTC-3D® does not
contain VOC’s, phthalates
or phosphates.
XTC-3D® fills in striations and
eliminates 90% of post finishing work.
Also available: You can Epsilon® EPS Foam Coating Epoxy
pigment Epsilon®
EpoxAmite® WHITE Laminating System with SO-Strong® color is a two-part thixotropic epoxy coating that self thickens for
EpoxAmite® White can not be used with tints. Some users add brushing onto a variety of surfaces without sagging. This product
“One Push” pre-calibrated pumps. color to every other was developed for fabricators that regularly coat EPS foam. Cured
layer to ensure material is easily sanded, primed and painted. When applying
thorough to vertical surfaces, Epsilon® wets out uniformly. Only 2 layers
coverage. minimum are required to build an adequate thickness and
provide an impact resistant coating.
UV
Resistant!
Tarbender® High Gloss Coating and Encapsulant
is a UV resistant clear liquid epoxy that can be poured over a variety
of surfaces to provide a strong, high gloss coating. Parts A and B mix
together and flow easily. Tarbender® epoxy
cures at room temperature and offers high
impact resistance. Tarbender® is an excellent
wood bar top coating and can also be poured Tarbender® is ideal
over plaster, concrete, foam, fabrics, etc. You for encapsulating objects.
can use Tarbender® to encapsulate 3-D sea shells and other ocean
For this application,
objects or coat flat objects, paper and more.
A:B Mix Ratio Mixed Viscosity Pot Life Demold Time Hardness (Shore D) Shrinkage (in./in.) Specific Volume (cu. in./lb.) Ultimate Tensile Compressive Strength Color themed pieces are used.
A:B Mix Ratio Mixed Viscosity Pot Life Thin Film Working Time Thin Film Tacky Recoat Thin Film Tack Free Cure Time Hardness (Shore D) Specific Gravity (g./c.c.) Specific Volume (cu. in./lb.) Color
Product Name Time Time
XTC-3D® 2A:1B pbv 350 cps 10 min. 20 min. 90 min. 2 hrs. 3.5 hrs. 80D 1.09 25.1 Clear
EPSILON® w/ 101 Fast 100A:20B pbw Variable 15 min. 45 min. 60 min. 2 hrs. 16 hrs. 75D 1.16 23.9 Beige
EPSILON® w/ 102 Med 100A:25B pbw Variable 30 min. 120 min. 180 min. 5 hrs. 24 hrs. 75D 1.14 24.3 Beige
Tarbender® 2A:1B pbv 1100 cps 45 min. 2 hrs. 6 hrs. 8 hrs. 16 hrs. 75D 1.09 25.4 Clear
Learn more at: www.smooth-on.com 36
Metal and color Surface Coat
effects are also easily
achieved by adding High Performance 3D Print Coating
Cast Magic® powders, is a protective coating for smoothing and finishing Epoxies
and So-Strong® or 3D printed parts. Coating self-levels and wets out
UVO® pigments. uniformly without leaving brush strokes.
XTC-3D® cures to a hard, impact resistant
coating that can be sanded, primed
and painted. It works with PLA, ABS,
Laywood, Powder
Printed Parts and
other rigid media.
XTC-3D® does not
contain VOC’s, phthalates
or phosphates.
XTC-3D® fills in striations and
eliminates 90% of post finishing work.
Also available: You can Epsilon® EPS Foam Coating Epoxy
pigment Epsilon®
EpoxAmite® WHITE Laminating System with SO-Strong® color is a two-part thixotropic epoxy coating that self thickens for
EpoxAmite® White can not be used with tints. Some users add brushing onto a variety of surfaces without sagging. This product
“One Push” pre-calibrated pumps. color to every other was developed for fabricators that regularly coat EPS foam. Cured
layer to ensure material is easily sanded, primed and painted. When applying
thorough to vertical surfaces, Epsilon® wets out uniformly. Only 2 layers
coverage. minimum are required to build an adequate thickness and
provide an impact resistant coating.
UV
Resistant!
Tarbender® High Gloss Coating and Encapsulant
is a UV resistant clear liquid epoxy that can be poured over a variety
of surfaces to provide a strong, high gloss coating. Parts A and B mix
together and flow easily. Tarbender® epoxy
cures at room temperature and offers high
impact resistance. Tarbender® is an excellent
wood bar top coating and can also be poured Tarbender® is ideal
over plaster, concrete, foam, fabrics, etc. You for encapsulating objects.
can use Tarbender® to encapsulate 3-D sea shells and other ocean
For this application,
objects or coat flat objects, paper and more.
A:B Mix Ratio Mixed Viscosity Pot Life Demold Time Hardness (Shore D) Shrinkage (in./in.) Specific Volume (cu. in./lb.) Ultimate Tensile Compressive Strength Color themed pieces are used.
A:B Mix Ratio Mixed Viscosity Pot Life Thin Film Working Time Thin Film Tacky Recoat Thin Film Tack Free Cure Time Hardness (Shore D) Specific Gravity (g./c.c.) Specific Volume (cu. in./lb.) Color
Product Name Time Time
XTC-3D® 2A:1B pbv 350 cps 10 min. 20 min. 90 min. 2 hrs. 3.5 hrs. 80D 1.09 25.1 Clear
EPSILON® w/ 101 Fast 100A:20B pbw Variable 15 min. 45 min. 60 min. 2 hrs. 16 hrs. 75D 1.16 23.9 Beige
EPSILON® w/ 102 Med 100A:25B pbw Variable 30 min. 120 min. 180 min. 5 hrs. 24 hrs. 75D 1.14 24.3 Beige
Tarbender® 2A:1B pbv 1100 cps 45 min. 2 hrs. 6 hrs. 8 hrs. 16 hrs. 75D 1.09 25.4 Clear
Learn more at: www.smooth-on.com 36
