Page 43 - Smooth-OnCatalog
P. 43
Sprayable Materials
EZ~Spray® R A T E D
FLAME
EZ~Spray® StyroCoat® Sprayable Plastic Foam Coating
Flame rated EZ~Spray® StyroCoat® plastic is
formulated to coat EPS foam economically. Dispensed
through Smooth-On’s EZ~Spray® Jr. spray system,
the plastic cures in about 2 seconds and can be
applied to vertical surfaces without running off.
Cured plastic is lightweight, impact resistant
and can be sanded for priming and painting.
StyroCoat® can also be sprayed into a rubber
mold to make fast, impact resistant castings.
StyroCoat® plastic is used for theme
design/fabrication
applications
and making
movie/
theater sets.
StyroCoat®
coated foam
pieces created for StyroCoat® coated
the “Give Kids the World” foam sculpture used for a
charity theme park, Kissimmee, FL. Broadway production of “Dracula.”
EZ~Spray® 45 Urethane Rubber, EZ~Spray® Plastic
EZ~Spray® 45 is a polyurethane rubber that can be sprayed for making fast EZ~Spray® Plastic
molds of large surface areas. It cures overnight with negligible shrinkage and sprayed to quickly create a
mother mold/support shell.
is suitable for casting a variety of materials.
EZ~Spray® Plastic can be sprayed over a rubber mold to create “mother molds” EZ~Spray® Plastic can
also be sprayed into the mold
or support shells with high impact resistance. Cured plastic is to create the finished piece.
lightweight, tough and durable.
Hyde Park Mouldings
sculpted and cast
several 7 ft. tall
(2.1 m.) concrete
fountains.
EZ~Spray® 45
produced a flexible mold
in a matter of hours.
A:B Mix Ratio Mixed Viscosity Pot Life Demold Time Hardness (Shore A) Shrinkage (in./in.) Volumetric Yield (cu. in./lb.) Tear Strength Tensile Strength Elongation at Break % Color A:B Mix Mixed Viscosity Pot Life Demold Hardness (Shore D) Shrinkage (in./in.) Volumetric (cu. in./lb.) Ultimate Tensile Elongation at Break %
Product Name Ratio Time Yield Color
StyroCoat® Plastic 1A:1B pbv Variable 2 sec. 60 min. 80D 0.015 24.7 3,170 psi 20% Off-White
EZ~Spray® Plastic 1A:1B pbv Variable 2 sec. 3 hrs. 75D 0.016 25.0 2,650 psi 10% Off-White
Learn more at: www.smooth-on.com 42
EZ~Spray® R A T E D
FLAME
EZ~Spray® StyroCoat® Sprayable Plastic Foam Coating
Flame rated EZ~Spray® StyroCoat® plastic is
formulated to coat EPS foam economically. Dispensed
through Smooth-On’s EZ~Spray® Jr. spray system,
the plastic cures in about 2 seconds and can be
applied to vertical surfaces without running off.
Cured plastic is lightweight, impact resistant
and can be sanded for priming and painting.
StyroCoat® can also be sprayed into a rubber
mold to make fast, impact resistant castings.
StyroCoat® plastic is used for theme
design/fabrication
applications
and making
movie/
theater sets.
StyroCoat®
coated foam
pieces created for StyroCoat® coated
the “Give Kids the World” foam sculpture used for a
charity theme park, Kissimmee, FL. Broadway production of “Dracula.”
EZ~Spray® 45 Urethane Rubber, EZ~Spray® Plastic
EZ~Spray® 45 is a polyurethane rubber that can be sprayed for making fast EZ~Spray® Plastic
molds of large surface areas. It cures overnight with negligible shrinkage and sprayed to quickly create a
mother mold/support shell.
is suitable for casting a variety of materials.
EZ~Spray® Plastic can be sprayed over a rubber mold to create “mother molds” EZ~Spray® Plastic can
also be sprayed into the mold
or support shells with high impact resistance. Cured plastic is to create the finished piece.
lightweight, tough and durable.
Hyde Park Mouldings
sculpted and cast
several 7 ft. tall
(2.1 m.) concrete
fountains.
EZ~Spray® 45
produced a flexible mold
in a matter of hours.
A:B Mix Ratio Mixed Viscosity Pot Life Demold Time Hardness (Shore A) Shrinkage (in./in.) Volumetric Yield (cu. in./lb.) Tear Strength Tensile Strength Elongation at Break % Color A:B Mix Mixed Viscosity Pot Life Demold Hardness (Shore D) Shrinkage (in./in.) Volumetric (cu. in./lb.) Ultimate Tensile Elongation at Break %
Product Name Ratio Time Yield Color
StyroCoat® Plastic 1A:1B pbv Variable 2 sec. 60 min. 80D 0.015 24.7 3,170 psi 20% Off-White
EZ~Spray® Plastic 1A:1B pbv Variable 2 sec. 3 hrs. 75D 0.016 25.0 2,650 psi 10% Off-White
Learn more at: www.smooth-on.com 42
