Page 47 - Smooth-OnCatalog
P. 47
Mold Making & Equipment
Casting Equipment 14” (35.56 cm)
Vacuum Chambers are used for removing air from high viscosity materials like
silicone rubber before pouring. They are also ideal for vacuum degassing liquid
plastics such as Crystal Clear® plastic for making bubble free castings. The vacuum 15” (38.1 cm)
chamber is made from tough aluminum and the lid is made from shatter resistant
acrylic. It can accommodate up to a 5 gallon pail. Vacuum pump not included.
12.5” (31.75 cm)
Pressure Chambers are used for pressure casting
liquid rubber and liquid plastics. Pressure casting
15.25” (38.74 cm) resins is optimal for creating castings that are truly
bubble free. Recommended pressure for pressure
casting is 60 psi. Maximum pressure is 80
psi. Compressor not included.
EZ~Spray® Jr. Gun is a versatile, convenient and easy-to-
use spray system for spraying 1,500 ml cartridges of EZ~Spray® 1,500 ml
mold making and casting materials for large projects. Additional cartridges
(750 ml each)
static mixers are available. Compressor not included.
The 400 ml Dispensing Gun is available in both a manual and electric version.
They both force parts A & B through a static mixing tube by squeezing the handle of
the manual gun or pulling the trigger on the electric gun. The electric gun is excellent
for frequent molders and larger projects. Mold Star® 16 FAST, Body Double®,
Dragon Skin®, Ecoflex® are available, and other 400 ml cartridges can be used.
The 200 ml Dispensing Gun is available in a manual version only.
Super Instant® Epoxy, and other 200 ml cartridges can be used.
Turbine Mixer has a simple EpoxAmite® 100
design, yet does a better job Dispensing Pumps
of mixing rubbers, plastics, are calibrated to deliver the correct
and foams than any mixer amount of Part A resin and Part B
we’ve tried. It also mixes hardener with a single push. One
powder-based Alja-Safe® Push ‘A’ + One Push ‘B’ = Correct
alginate and Matrix NEO® Amount of product to mix - no
with fiber better, need to weigh the components.
and is easy to clean.
165 oz.
Reike Spout Valve Adapter Kit 32 oz. 64 oz.
is designed to fit snugly inside the 16 oz.
Reike brand pour spout which comes
equipped with all 5 gallon buckets of
Smooth-On material. The kit permits
the pail to be stored on its side for more Mixing Containers with graduated markings.
accurate and convenient pouring. Available in 16 oz., 32 oz., 64 oz., and 165 oz. sizes.
Packaged in cases of 10, 50 or 100 containers.
46
Casting Equipment 14” (35.56 cm)
Vacuum Chambers are used for removing air from high viscosity materials like
silicone rubber before pouring. They are also ideal for vacuum degassing liquid
plastics such as Crystal Clear® plastic for making bubble free castings. The vacuum 15” (38.1 cm)
chamber is made from tough aluminum and the lid is made from shatter resistant
acrylic. It can accommodate up to a 5 gallon pail. Vacuum pump not included.
12.5” (31.75 cm)
Pressure Chambers are used for pressure casting
liquid rubber and liquid plastics. Pressure casting
15.25” (38.74 cm) resins is optimal for creating castings that are truly
bubble free. Recommended pressure for pressure
casting is 60 psi. Maximum pressure is 80
psi. Compressor not included.
EZ~Spray® Jr. Gun is a versatile, convenient and easy-to-
use spray system for spraying 1,500 ml cartridges of EZ~Spray® 1,500 ml
mold making and casting materials for large projects. Additional cartridges
(750 ml each)
static mixers are available. Compressor not included.
The 400 ml Dispensing Gun is available in both a manual and electric version.
They both force parts A & B through a static mixing tube by squeezing the handle of
the manual gun or pulling the trigger on the electric gun. The electric gun is excellent
for frequent molders and larger projects. Mold Star® 16 FAST, Body Double®,
Dragon Skin®, Ecoflex® are available, and other 400 ml cartridges can be used.
The 200 ml Dispensing Gun is available in a manual version only.
Super Instant® Epoxy, and other 200 ml cartridges can be used.
Turbine Mixer has a simple EpoxAmite® 100
design, yet does a better job Dispensing Pumps
of mixing rubbers, plastics, are calibrated to deliver the correct
and foams than any mixer amount of Part A resin and Part B
we’ve tried. It also mixes hardener with a single push. One
powder-based Alja-Safe® Push ‘A’ + One Push ‘B’ = Correct
alginate and Matrix NEO® Amount of product to mix - no
with fiber better, need to weigh the components.
and is easy to clean.
165 oz.
Reike Spout Valve Adapter Kit 32 oz. 64 oz.
is designed to fit snugly inside the 16 oz.
Reike brand pour spout which comes
equipped with all 5 gallon buckets of
Smooth-On material. The kit permits
the pail to be stored on its side for more Mixing Containers with graduated markings.
accurate and convenient pouring. Available in 16 oz., 32 oz., 64 oz., and 165 oz. sizes.
Packaged in cases of 10, 50 or 100 containers.
46
